Common Water Heater Problems & How to Fix Them

Common Water Heater Problems & How to Fix Them

Your water heater works hard nearly every single day to provide hot water on demand. Although it’s one of the most invaluable plumbing fixtures in many households, most homeowners usually take it for granted until it stops working. When you depend on hot water to carry out household chores and bathing, water heater problems can be frustrating.

That’s why it’s crucial to understand the common water heater problems and what you can do about them. When you are in need of any help with your water heater, get in touch with Just Water Heaters.

Here are the common water heater problems and some advice about how to fix them.

  • No Hot Water

A water heater that does not produce hot water means that there could be an issue with heating elements, an interruption of power to the water heater, or you could be dealing with a faulty thermostat. If your water heater is gas-powered, the issue could be a faulty thermocouple. Diagnosing and fixing these issues is a pretty easy job for an experienced water heater company. Be sure to call a "water heater repair service near me" to fix the problem rather than going the DIY route.

  • Not Enough Hot Water

There are many possible reasons why you may not have enough hot water. It could be an issue to do with the thermostat, a tripped limit switch, or your tank may not be big enough to meet your household’s demand for hot water. You can try to adjust your thermostat to the desired temperature, but if the problem persists, call a water heater company to check your unit.

  • Water Leaks

A leak is possibly caused by loose connections, a bad gasket, improper water pressure, a corroded tank, or faulty valves. Ensure you check for any loose plumbing connections and do a visual inspection of valves, heating element bolts, gasket, and the tank. If the tank is corroded from the inside, that could be the end of your water heater. You can call a water heater repair service to perform a thorough inspection and advice you on the way forward.

  • Smelly Water

Smelly hot water can be a sign of a tank infested with bacteria. When you notice strong water odors coming from the water, your first course of action would be flushing the tank of replacing the anode rod. When the anode rod is failing, your water heater may start to produce discolored water.

  • Rumbling Sounds

If you hear strange noises from your water heater, it may be due to sediment buildup in the tank or malfunctioning heating elements. You can fix this problem by flushing the water heater and if the problem persists, call a water heater company to assist you.

  • Water is Too Hot

This can happen when the temperature is set too high. The solution is to access the thermostat and adjust the temperature as needed. You can read your unit’s manual to learn how to adjust the thermostat.

Got a water heater problem? Let it be fixed by our team at Just Water Heaters.